COMP CAMS XFI SERIES N/A STAGE 3 NSR (11-14 MUSTANG GT) 191160

XFI NSR 5.0L Modular 4V Camshaft Set - Max effort street/strip cam set. 1900-7200 RPM Range.

 

Fits 2011-2014 Mustang 5.0 Coyote

 

XFI NSR (NO SPRINGS REQUIRED) Hydraulic Roller Swinging/Finger Follower Camshafts.

 

Strong power gains above 5500-7200+. Full length headers and 3.73+ gear.

 

Requires phaser limiter kit #5493 and custom ECU programming.

 

Comp Cams 191160 Specs:

RPM Range: 1900 to 7200

Lobe-Center Angle: 126

Intake Centerline: 129

Duration @ .050" Lift: Intake- .236" Exhaust- .239"

Valve Lift: Intake- .492" Exhaust- .453"

 

The Comp Cams Phaser Limiters and Adjustable Phaser Locks allow independent control over intake and exhaust centerlines, and eliminate piston to valve clearance issues that can occur when using larger aftermarket camshafts in 2011-2016 Ford 5.0L Modular V8 engines.

 

Adjustable Phaser Locks for the 5.0L Coyote Modular V8 Engines allow fully adjustable locking over the OEM phaser range (50 degrees) by using a stock timing set, phaser system, bolts with special plugs and slotted degree plates. The locks are easy to adjust on the engine and include a 4 crank degree (2 cam degrees) mark on the outer diameter for accurate adjustment. They allow aftermarket race cams to be physically degreed and locked to ensure adequate piston to valve clearance and precise centerline control at very high RPM under extreme conditions, independent of any computer or mapping.